Bachmann Branchline OO Scale 35-801ASFX Class 30 D5564 BR Green (Late Crest) Diesel Locomotive

R7,680.00

Out of stock

Compare

Description

Description : The Brush Type Twos – Class 30s and Class 31s – are the next Diesel Locomotives to get the Bachmann Branchline treatment, with models of these long-lived prototypes joining the Branchline OO scale range for the first time. Following in the footsteps of their N scale counter-parts from Graham Farish, these new OO scale models have all the hall-marks of the Branchline Class 37 & 47 locomotives and more.
Depicting a Class 30 in original condition, this locomotive was fitted with a Mirrlees engine and the Branchline model faithfully recreates this, with the correct roof exhaust ports and Mirrlees engine block detail visible through the bodyside windows.
With high fidelity mouldings, numerous separately fitted parts and countless tooling variations to capture the minutiae of the real locomotives throughout their lives, our new Class 30 is brought to life with an exquisite livery appli-cation using true-to-prototype colours, fonts and logos. Along with an un-precedented array of lighting features, our Dual Fitted speaker system is fitted to all models. This SOUND FITTED DELUXE model provides the ul-timate experience, producing realistic running sounds alongside the motor-ised radiator fan, authentic tinted windscreen glazing and, for the first time ever, DCC-uncoupling – thanks to the Bachmann Auto-release Coupling System!

• Bachmann Branchline OO Scale
• Era 5
• Pristine BR Green (Late Crest) livery
• Running No. D5617
• SOUND FITTED DELUXE- Fitted with a Zimo MS450P22 DCC Sound Decoder – See below for the function list
• Motorised Radiator Fan
• Tinted Windscreen Glazing (Driver and Second Man Windscreens only)
• Auto-Release Coupling System (Fitted at both ends)
• Length 228mm

DETAIL VARIATIONS SPECIFIC TO THIS MODEL
• Original Body
• Original Gangway Doors
• Glazed Headcode Panels – displaying Blinds 1_52 and _G48
• Original Windscreen Washer Jets (Uncovered)
• Full Bufferbeam Cowling
• Original Windscreen
• Original Main Fan Grilles with Horizontal Fins
• Mirrlees Engine Exhaust Ports
• Mirrlees Engine Block Detail
• Original Open Boiler Port
• Original Water Filler Hatch
• Open Bodyside Steps
• Original Battery Boxes

BACHMANN BRANCHLINE CLASS 30/31 SPECIFICATION
MECHANISM:
• Five pole, twin shaft motor with two flywheels providing drive to both bogies
• All axle drive
• Electrical pickup from all outer wheels on each bogie
• Separate metal bearings fitted to each axle
• Diecast metal chassis block and bogie towers
• Diecast metal gearboxes, with gearing arranged for prototypical run-ning speeds and haulage capabilities
• 5mm (OO gauge) wheels to NEM310 & NEM311 standards with au-thentic profile and detailing
• Detachable coupling pockets to NEM362 standards fitted to each bo-gie
• Auto-Release Couplings fitted at both ends – DCC operated, hands-free uncoupling with the press of a function button (SOUND FITTED DELUXE models only)
• Designed to operate on curves of second radius (438mm) or greater
DETAILING:
• Bogies constructed from multiple components featuring full relief de-tail
• Rotating radiator fan, driven by an independent motor and gearbox, operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only)
• Tinted windscreen glazing (Driver and Second Man windscreens only as per the prototype, SOUND FITTED DELUXE models only)
• Separately applied metal detail parts, including grab handles, wind-screen wipers and etched fan grilles
• Sprung metal buffers
• Each model supplied with a full set of decorated, model-specific buff-erbeam pipework and accessory parts including three-piece, body-mounted snow ploughs
LIGHTING:
• Directional lighting, including illuminated headcode panels and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control
• Cab lighting*, assigned to two DCC functions for separate switching of each
• Separately switched Engine Room lighting*
• Single or win red tail lights (*when used on DCC)
• Authentic light colours and temperatures selected for each model based on era and application
DCC:
• Plux22 DCC decoder interface
SOUND:
• Two quality speakers employed for optimum sound reproduction, fit-ted to every model as standard
• Zimo MS450P22 DCC Sound Decoder fitted to SOUND FIT-TED and SOUND FITTED DELUXE versions
• Two sound projects to accurately capture the sounds of Class 30 (Mirrlees Engine) and Class 31 (English Electric Engine)
• Sound files for each project produced specifically for the Bachmann Branchline Class 30/31 using recordings from real locomotives and archive audio
• SOUND FITTED and SOUND FITTED DELUXE models operate on DCC and Analogue control as supplied. On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied
LIVERY APPLICATION:
• Authentic liveries applied to all models
• Multiple paint applications employed on each model using BR and corporate specification colours
• Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours
• In addition, where applicable Etched Nameplates and Plaques are al-so provided

SOUNDS
F0 – Directional Lights – On / Off (plus Light Switch Sound)
F1 – Sound On/Off
F2 – Brake
F3 – Single Horn
F4 – Two-Tone Horn
F5 – Light Engine Mode
F6 – Engine Idle
F7 – Speed Lock
F8 – Cold Start
F9 – Flange Squeal (Speed Related)
F10 – Compressor
F11* – Uncoupling Sequence No. 1 End (Fan)
F12* – Uncoupling Sequence No. 2 End (non-Fan)
F13 – Coupling Clatter
F14 – On – Single Rear Red Tail Lights / Off – Twin Rear Red Tail Lights
F15 – High Intensity Light (If Fitted)
F16 – Guard’s Whistle and Driver Response
F17 – Priming Pump
F18 – Speed Related Wagon Buffering
F19 – No. 1 End (Fan) Directional Lights Off
F20 – No. 2 End (non-Fan) Directional Lights Off
F21 – Cab Light On – No. 1 End
F22 – Cab Light On – No. 2 End
F23 – Engine Room Lights
F24 – Automatic Drain Trap
F25 – Shunt Mode
F26 – Detonators
F27 – Volume Down
F28 – Volume Up
*Uncoupling Sequence operates the Auto-Release Couplings, including the movement of the locomotive to release tension from the couplings, dis-engagement of the couplings, and the movement of the locomotive to pre-vent coupling up reoccurring, along with associated sound effects and train crew chatter.
Analogue Users: Please note that normal load running sounds and any other automatic or randomised sounds will also operate, along with fan op-eration and sounds, when this model is used on analogue control (DC) straight from the box!

CLASS 30/31 HISTORY
The BR Class 30 and Class 31 Diesel Locomotives, originally known as the Brush Type 2s, were built by Brush Traction from 1957-1962, with a total of 263 locomotives constructed. The first locomotive entered service in No-vember 1957 and the design was one of the Pilot Scheme locomotives or-dered by British Railways to replace steam traction. The Class was original-ly allocated to the Eastern Region, but gradually became common on both the Western and London Midland regions too.
Originally built with Mirrlees engines, these proved unsuccessful and in 1964 an English Electric 12SVT engine was fitted to one example for trails. The trials proved successful and between 1965 and 1969 the entire class was fitted with English Electric engines. Two TOPS classifications were used to distinguish between the two engine types, with the Mirrelees engine locomotives denoted Class 30s, whilst the English Electric examples be-came Class 31s.
The Class 31/1s were the standard locomotives, distinguished from the first small batch of locos – the 31/0s – which had Red Circle multiple-working control equipment, a non-standard feature that led to them being withdrawn relatively early in the late-1970s. The 31/1s were fitted with Blue Star multi-ple-working equipment, as found on many other BR classes, and all had steam heating boilers from new, making them ideal for hauling passenger services. The Class 31/1s could be found on a variety of secondary and re-lief passenger duties as well as parcels and freight traffic. Commonly used in East Anglia, with allocations at Stratford and March depots, they were al-so found throughout the Eastern Region of BR with Finsbury Park sporting a large allocation, along with the depots at Tinsley, Immingham and Thor-naby. Examples were also allocated to Bristol Bath Road and Old Oak Common on the Western Region, where they could be found working pas-senger trains as far west as Barnstaple and Paignton. In the early 1980s, Healey Mills and Bescot on the Midland Region also gained an allocation as replacements for Class 25s.
During the 1970s some Class 31s were fitted with Electric Train Heating (ETH) and these were reclassified as 31/4s to denote this feature. The 1980s would see BR undertake a programme of refurbishment for much of the fleet, this included the fitting of ETH to more locomotives, but refur-bishment was not reserved exclusively for the 31/4s, Class 31/1s were also refurbished without receiving ETH equipment. During refurbishment buffer-beam cowlings were removed along with the bodyside band, headcode boxes were plated over and fitted with two marker lights, and any remaining disc headcodes were removed. Where steam heat boilers remained, these were removed and a concrete block added instead to maintain the weight balance.
As passenger work dried up, many of the 31/4s were displaced and found themselves allocated to the departmental sector. In 1990, to reduce maintenance costs and prevent their ETH-fitted locos being borrowed for passenger work when extra traction was needed, the departmental sector isolated the ETH and removed the jumper cables from some of its 31/4s, resulting in these locos being reclassified as 31/5s. There were also two lo-comotives classified as 31/6, these had through ETH wiring fitted allowing them to work double-headed with an ETH-fitted loco.
The first withdrawal came in 1975 following accident damage, but most survived until the 1990s when EWS took on 153 examples from BR’s Transrail and Mainline freight divisions, although EWS spent little time run-ning down its inherited fleet. Other operators however kept Class 31s active on the mainline with operations only now dwindling out. The Class has also been popular with the preservation movement, with more than 25 examples now preserved.